Stainless Steel Twin Wall Flue Pipe
Filters Sort results
Reset Apply
Name | Price | Qty. | Total | ||
|---|---|---|---|---|---|
 | Locking Band Twin Wall Flue 5 inch TwPro
The locking band is used to seciure two parts… Show more (+) Locking Band Twin Wall Flue 5 inch TwPro
The locking band is used to seciure two parts of the flue together. A locking band is required at every joint.
Includes integral locking band fitted to the bottom of each length.
High quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board). Show less (-) | £22.99£29.99 | + £0.00 £0 | ||
 | Locking Band Twin Wall Flue 6 Inch
The Locking Band is used to secure two parts of… Show more (+)
Locking Band Twin Wall Flue 6 Inch
The Locking Band is used to secure two parts of the flue together. A Locking Band is required at every joint.
High-quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board). Show less (-) | £22.99£24.99 | + £0.00 £0 | ||
 | Wall Support 50-80mm Twin Wall Flue 5 inch TwPro
Wall supports are to be used for lateral… Show more (+)
Wall Support 50-80mm Twin Wall Flue 5 inch TwPro
Wall supports are to be used for lateral support only and should be used a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.
High quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).
Show less (-) | £23.99£29.99 | + £0.00 £0 | ||
 | Wall Support Bracket 50-80mm Twin Wall Flue 6 Inch Wall support are to be used for lateral… Show more (+)
Wall Support Bracket 50-80mm Twin Wall Flue 6 Inch Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.
High-quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).
Show less (-) | £23.99£29.99 | + £0.00 £0 | ||
 | Guy Wire Bracket Twin Wall Flue 5 inch TwPro
This component is used to secure unsupported chimney… Show more (+) Guy Wire Bracket Twin Wall Flue 5 inch TwPro
This component is used to secure unsupported chimney sections above 1.5m of the roof level, an extra 1.5m can be achieved in conjunction with the guy wire kit.
High quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board). Show less (-) | £23.99£29.99 | + £0.00 £0 | ||
 | Storm Collar Twin Wall Flue 5 inch TwPro
Used to ensure water tightness in the passage through… Show more (+) Storm Collar Twin Wall Flue 5 inch TwPro
Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water tightness.
High quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board). Show less (-) | £23.99£29.99 | + £0.00 £0 | ||
 | Guy Wire Bracket Twin Wall Flue 6 inch TwPro
This component is used to secure unsupported chimney sections… Show more (+) Guy Wire Bracket Twin Wall Flue 6 inch TwPro
This component is used to secure unsupported chimney sections above 1.5m of the roof level, an extra 1.5m can be achieved in conjunction with the guy wire kit.High quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances.
Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick.
Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3.
All parts are fully welded.
Distance to combustibles is 50mm
APPROVALS
TWPro is HETAS Approved and is UKCA marked.
Designation Number
TWPro EN1856-1 T600 N1 W V2 L50040 G50.
TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY
25 Year Conditional Warranty on product
2 years on paint finish
INSTALLATION
TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).
Show less (-) | £23.99£29.99 | + £0.00 £0 | ||
 | Storm Collar Twin Wall Flue 6 inch TwPro
Used to ensure water tightness in the passage through… Show more (+) Storm Collar Twin Wall Flue 6 inch TwPro
Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
High-quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board). Show less (-) | £23.99£29.99 | + £0.00 £0 | ||
 | Single Wall to Twin Wall Adapter Universal Adaptor to connect the appliance to the TWPro, can also… Show more (+) Single Wall to Twin Wall Adapter Universal Adaptor to connect the appliance to the TWPro, can also connect single wall connecting flue to TWPro. This has a tapered design to allow smooth transition from single wall to twin wall
High quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty in product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).
Show less (-) | £24.99 | + £0.00 £0 | ||
 | Tee Cap
Tee Cap is used to cap off the bottom or unused end of 90/135 tee… Show more (+) Tee Cap
Tee Cap is used to cap off the bottom or unused end of 90/135 tee, this is usually fitted to the bottom of a base support to allow easy removal for sweeping and access.
Includes integral locking band fitted to the bottom of each length.
High quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm
APPROVALS TWPro is HETAS Approved and is UKCA marked. Designation Number TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY 25 Year Conditional Warranty on product 2 years on paint finish
INSTALLATION TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board). Show less (-) | £28.99£35.99 | + £0.00 £0 |
